| 主要特点
采用Piezo方式放电;属高频率(72kHz)方式、可减少放电针污染。
可设置在狭小空间内、快速消除静电之喷嘴型小型除静电设备。
超小型且具有感應器Type、Gun Type等多種來可充足为各種環境、
並採用 Air Filter(Option)可防止因空气引起的污染。
• 为自动辨别接近物体的红外线感应器安装型、可只针对需求时删除静电。
• 采用抗臭氧的 Ceramic Nozzle。
• Ion Balance保持为±15V(300mm基准)以内。
• 可设定为感应器的敏感度及启动时间。
• 使用专用安装配备(Option)来对应特殊的安装环境。
 Infrared Rays Sensor
|
|
搭配红外线感应器,依照使用环境可调节感应器的感应度及启动时间的间隔。
|
The bracket for special space and equipment
使用专用安装配备(Option)来对应特殊的安装环境。
 Angle Stand (Option) Flexible Stand (Option)
规格
| Category |
Descriptions |
Remark |
| Model |
SPN-11S |
| Input Power |
DC 24V |
Adaptor (AC110/220V, 50/60Hz, DC24V) |
| Power Consumption |
15W |
|
| Ion-Generation Method |
High Frequency AC |
Piezo |
| Ion Balance |
Within ±15V |
300mm |
| Air Pressure |
0.1~0.5MPa |
CDA(Clean Dry Air), N2 |
| Air Inlet |
Φ6 |
|
| Operation Circumstance |
0℃ ~ +50℃(32℉ ~ 122℉), 35% ~ 85% RH |
|
| Nozzle Material |
Teflon |
|
| Electrode Material |
Tungsten / Titanium |
|
| Weight |
250g |
|
| Color |
White |
|
| Mounting Method |
Flexible Type |
|
| Sensor |
Photoelectric Sensor |
|
| Alarm Function |
H/V Abnormal |
|
| Interface |
Alarm(H/V Abnormal) |
|
| Warranty |
1 year |
|
| Model |
Photoelectric Sensor(HP100-A1) |
Remark |
| Detection System |
Diffuse-scan |
|
| Power Supply |
10 to 30Vdc (ripple 10% max.) |
|
| Current Consumption |
16mA max. |
|
| Scanning Distance |
1m |
|
| Differential Travel |
20% max. (at rated scanning distance) |
|
| Operation Mode |
Light-ON / Dark-ON selectable by switch |
|
| Response Time |
500ms max. for both operation and recovery |
|
| Emitter |
Infrared LED |
|
| Ambient light Immunity |
Incandescent lamp: 10,000 lux max.
Sunlight: 40,000 lux max. |
|
 产品图面
Fitting Tubes
组件结构(详情咨询13560409498)
|
