• SPE-100是非接触式静电压量测感应器、可在不接触于带电体的情况下量测静电压。
• 量测范围最大为±19.999[kV] 以下的表面电压。
• SPE-100具有高感度的感应器可量测带电体的静电压 (Resolution : 0.1V)。
• 此产品可迅速精确的量测于带电体的静电压。(误差范围为±2%、取样速度 0.5 sec.)
• 以静电压量测感应器分离型可使用于多种环境下。
在静电压量测感应器上附着旋转型稳定器而可稳定长期固定量测。
• 具有讯号输出功能、在外部可监控实时静电压。
| Category |
Descriptions |
Remarks |
| Model |
SPE-100 |
| Range / Resolution at 1” |
0 to ±19.999[kV] / 1V |
|
| 0 to ±1.9999[kV] / 0.1V |
| Accuracy |
±2% of reading |
|
| Capacitance (to ground) |
60 nF |
|
| of Sensor |
| Sensitivity if used to |
0.1V or 1V, depending on range |
|
| sense charge |
| Drift |
Less than 0.5 V (1 year period) |
at 25.4mm(1 Inch) |
| Sampling Speed |
0.5 sec |
|
| Environmental |
0℃ to 40℃(30℉ to 110℉) 0-85% RH |
|
| Size |
Static Voltage Sensor |
72(H) X 31(Diameter) [mm] |
|
| Body |
75(W) X 122(H) X 50(D) [mm] |
| Weight |
330 g |
without battery |
| Battery |
9 Volt Alkaline / "Low Battery" indicator |
included |
| Cable Length |
90 cm standard AT cable |
special option : 400cm |
| Warranty |
1Year |
|
产品图面
Body
Static Voltage Sensor
